LAB EXTRUDER for Industry Applications

A PE Lab Extruder, for any application, is required to have Qualitative check of the product recipe and processing parameters, without generating wastage. In today’s competitive market conditions demands for varying percentage of fillers & additives to be added with the base polymer, are increasing to meet the COST FEASIBILITY of the end product.

A PE lab Blown Film Extrusion Line is essential, to set the recipe of the polymer for the end-user, by doing trial and error process of mixing CaCO3 even upto 20%. On the basis of this result one can confidently suggest his customer about lesser polymer consumption, maintaining the qualitative and quantitative aspect of the film within the tolerable limit.

A PE Lab Raffia Tape Line : For meeting the COST FEASIBILITY of the end product, today’s stringent market conditions demands varying percentage of fillers, additives to be added with the base polymer. The Neptune Lab Tape line can give quick result in assessing the variable input cost as per quality requirement for the specific end Product of particular customized

APPLICATION


  • Colour Matching
  • Product spec combination
  • Recipe setter

Lab Extruder for Educational Institute

Our E lines are aimed to make the student run the line with his own hand and learn rather than just see and learn.
The entire industry is reeling under pressure in search of practical training and that excited us to create this line It’s a 4 in 1 combo line with common extruder and the output is just 5 kg / hr

APPLICATION


  • A delight for all Educational Institute

LAB EXTRUDER Productivity Range of Different Models Lay Flat Width & Diameter
Film 5 kg/hr Film to 100 to 150mm
Tape 5 kg/hr Raffia Tape to 3mm
Pipe 5 kg/hr Pipe to 12mm
Filament 5 kg/hr Monofilament to 0.3mm

4 in 1 E-LINE Productivity Range of Different Models Lay Flat Width & Diameter
Combo Model 5 kg/hr Film to 100 to 150mm, Pipe to 12mm, Raffia Tape to 3mm, Monofilament to 0.3mm

PRODUCTS OF OUR EXTRUSION LINES